DH36DAL 3 Mode SDS Hammer 36 Volt 2 x 2.6Ah Li-Ion
The Hitachi DH36DAL is a lightweight Cordless 36 Volt SDS-Plus hammer drill with Save Power Mode and three action modes, hammer drilling, rotary drilling and light chiseling. It has variable speed, reverse and has an electronic brake.In Power mode, the DH36DAL will drill up to 26mm in concrete with ease, switch to Save Mode and it reduces the speed and impact rate for lighter work, also reducing the risk of damage to smaller drill bits.The lightweight plug-in style Lithium-Ion batteries hold their charge for longer, which means there is no discernible loss of performance throughout the battery charge. The batteries also contain unique protection circuitry to prevent damage from overloading, overcharging and high discharging; this gives Hitachi Lithium-Ion batteries up to 260% longer service life than similar batteries.Lithium-Ion batteries contain no harmful cadmium, making them better for the environment. Also, Hitachi Lithium-Ion batteries have an extremely low self-discharge rate. If a battery is not used, the battery charge will drop by only 5% in 40 days; this means less energy is required to recharge it.Specification:Voltage: 36 VoltBattery Capacity : Li-Ion 2.6 AhNo Load Speed : 0-550 / 0-1100/minImpact Energy : 2.8 JBlows per Minute : 0-2250 / 0-4200/bpmTool Holder SDS-Plus Max. Drilling Capacity Wood - 30 mmMetal - 13 mmConcrete - 26 mmWeight: 4.0 kgLength 322 mmThe DH25DAL comes complete with two 2.6Ah slide-in Lithium-Ion batteries, 60 minute charger, side handle, depth stop and carrying case.
Related Products
Core Drill 76mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 76 mmType K Taper kitTungsten Carbide TippedSupplied with: 1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.
Ball Pein Hammer Fibreglass Shaft 908g (32oz)
Universal engineers metal working hammer, precision ground with hardened striking faces to withstand the rigours of all metal working applications. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. Manufactured in accordance to BS876.Weight 900g (2 lb)
Hammer in Fixing 8 x 120mm Card of 10
For fast fixing with minimal screwdriver work.Quicker to use than standard plugs.For fixing stud battens to walls before cladding.For long runs of shelf supports, fixing skirting boards to walls. Although hammered in, it can be un-screwed.Size. 8 x 120mm.Card of 10.Fixing Thickness 80mm